Obnova vymazaneho Bootloaderu

Poslaťod titan932940 » Uto 08. Aug 2017 10:31:50

Mam takyto problem pri prehravani firmware sa mi brigol ide len do HT modu to znamena PC ho najde inak je mrtvy!! PC ho vidi ako QHSUBS_DLOAD. Podla fora tam staci cez HT tools nahrat ten loader!! Nejde my to stale to pise ze telefon nenajdeny. Prosim o pomoc a postup. Telefon bol odomknuty ale tim zamkom si niesom isty. Este tam bol Boot 3.49.mystlim 117. Takze to po mne chce debrick.img a to po uprave nahrat na Pametovku ma niekto to img??
2.1. Download Win32DiskImager
2.2 Download debrik.img thank to @ValenteL for the file.( for i9205 )
2.3 Unzip both items and run win32diskimager
2.4 Select Image File debrick.img
2.5 Select Device ( put your sdcard in 16gb or 32bg )
2.6 Click write ( note this will format your sdcard plz backup your data )
2.7 After finish put your sdcard to your phone. you will se a magical your phone will boot.

3.1 After it boot turn off the phone and go to download mod.
3.2 Open odin and flash the stock frameware ( i flash I9205XXUCML1 )

4. After boot go to setting, more storage and format your sdcard

Now your phone back to normal

To create the image file needed for this De-Brick method download this Thank to @DocHoliday77
titan932940
zelenáč
zelenáč
 
Príspevky: 2
Registrovaný: Uto 08. Aug 2017 10:01:24
Bydlisko: Bratislava
mobil: Samsung
tablet: acer

Poslaťod Stano36 » Uto 08. Aug 2017 17:25:26

Návod a súbory ktoré uvádzaš je skôr pre Samsung ako HTC.


titan932940 píše:
2.1. Download Win32DiskImager
2.2 Download debrik.img thank to @ValenteL for the file.( for i9205 )
2.3 Unzip both items and run win32diskimager
2.4 Select Image File debrick.img
2.5 Select Device ( put your sdcard in 16gb or 32bg )
2.6 Click write ( note this will format your sdcard plz backup your data )
2.7 After finish put your sdcard to your phone. you will se a magical your phone will boot.

3.1 After it boot turn off the phone and go to download mod.
3.2 Open odin and flash the stock frameware ( i flash I9205XXUCML1 )

4. After boot go to setting, more storage and format your sdcard

Now your phone back to normal

To create the image file needed for this De-Brick method download this Thank to @DocHoliday77
Obrázok užívateľa
Stano36
Administrátor
Administrátor
 
Príspevky: 6764
Registrovaný: Pia 06. Máj 2011 13:55:10
Bydlisko: Kriváň
mobil: HTC 10
tablet: Lenovo YT3-PRO

Poslaťod titan932940 » Uto 08. Aug 2017 17:40:58

No ono to je zo samsungu i930 ale postup na forach je ten isty, je este jedna moznost pouzit linux a natiahnut loader priamo do telefonu ale tato moznost sa mi nezda..

https://www.youtube.com/watch?feature=p ... b5f3If-2Jw

no podla toho co pise staci len linux a ten subor a booter je ok
ja linux poznam a urcite to bude este chciet driver
Boot the linux box and download the appropriate package for the device.
WARNING: IT IS DEVICE SPECIFIC. DO NOT USE THE GSM VERSION ON A CDMA EVO AND VICE VERSA. SAME GOES FOR THE INSTRUCTIONS
Extract the package in the home directory
Open up a terminal
Remove SIM, microSD card and battery and connect the device using the USB cable. This procedure must be done without battery
Detect the device using the script provided. Type this in the terminal
Code:

./brickdetect.sh

You should get something like sdX. We are interested on that "X"
Unplug the usb cable from the device
Backup the hboot currently in the phone by using this command. Plug the device in ONLY when asked to
Code:

sudo ./emmc_recover --backup b_hboot.img --device /dev/sdX12

Replace the "X" with the letter the script gave you
Follow the on-screen instructions from emmc_recover
Hexdump the b_hboot to check the hboot version
Code:

hexdump -C b_hboot.img |less

The output should be like this:
Code:

00000000 05 00 00 00 03 00 00 00 00 00 00 00 00 00 10 40 |...............@|
00000010 d8 fc 0f 00 d8 fb 0f 00 d8 fb 1f 40 00 01 00 00 |...........@....|
00000020 d8 fc 1f 40 00 00 00 00 12 00 00 ea 31 2e 34 39 |...@........1.49|
00000030 2e 31 31 30 37 00 00 00 38 32 36 30 20 53 50 4c |.1107...8260 SPL|
00000040 00 00 00 00 00 f0 20 e3 53 48 49 50 00 00 00 00 |...... .SHIP....|
00000050 00 f0 20 e3 00 f0 20 e3 48 42 4f 4f 54 2d 38 32 |.. ... .HBOOT-82|
00000060 36 30 00 00 00 f0 20 e3 65 64 62 61 38 31 32 66 |60.... .edba812f|

This is the typical hex of a hboot. We are interested to check if that is the hboot partition and if it is, to get to know the version. In this case it is 1.49
If in the above step you failed to identify the hboot, unplug all devices connected to that pc, reboot and try again
Unplug the device
Check again it is the right version, because if you do a mistake here, you won't be able to go back
You can only flash the same version as the one in the device.


!!!!!DO NOT ATTEMPT TO FLASH ANOTHER VERSION OR DOWNGRADE!!!IT HAS BEEN PROVEN FATAL!!!!
Flash the hboot on the device. Replace "V.VV" with hboot version (eg. 1.49) and "X" with the one you got from the detect script. Plug the device in ONLY when asked to
Code:

sudo ./emmc_recover --flash shotrUV.VV.nb0 --device /dev/sdX12 --backupafter hboot_f.nb0

Follow the on-screen instructions from emmc_recover. A successful flash should have this output:
Code:

511+1 records in
511+1 records out
1047808 bytes(1.0 MB) copied

Unplug the device, put SIM, microSD card and battery in and power on
Congratulations, the device is unbricked.
FLASH THE RUU IMMEDIATELY AFTER RECOVERING!! The device will be unstable after the recovery if you don't flash it.


Notes on the procedure:

If the device doesn't power on, get a copy of the hboot_f.nb0 and b_hboot.img (should be located in the home directory) and contact us
The connection between the device and the pc will be unstable, and will time out. You have to be quick when doing the above, specially while flashing. If the connection times out don't panic, just unplug and replug the device
Unity and automount are known to cause issues in ubuntu 11.04 and 11.10. We recommend getting rid of both, or use a 12.04, or 10.04/.10 liveCD
USB3 ports do not work properly. Please plug the device in a USB2 port
How to disable automount on ubuntu
Code:

gsettings set org.gnome.desktop.media-handling automount false



Downloads

For EVO 3D GSM( ShooterU):
32bit version MD5: 4fa6ddf99acc33f069e3192ee8417aa0
64bit version MD5: 8acfdfc391de99e864bfd7e6ca34e9b3

Don't have a linux distro installed on your pc? We highly recommend



https://forum.xda-developers.com/showth ... ?t=1627897
titan932940
zelenáč
zelenáč
 
Príspevky: 2
Registrovaný: Uto 08. Aug 2017 10:01:24
Bydlisko: Bratislava
mobil: Samsung
tablet: acer


Späť na HTC Evo 3D

TOPlist